home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-06
/
iqs.zip
/
IQS327.DOC
< prev
next >
Wrap
Text File
|
1993-01-27
|
3KB
|
94 lines
What's new in I-Queue! Server v3.27:
====================================
Release version of 3.26a, which was in limited distribution
-Fixes/corrections
Added additional handling for login/out problems.
Fixed problem when an active job is deleted.
What's new in I-Queue! Server v3.26:
====================================
-Additional Features
/Kxxx Buffer size.
This parameter allows you change the number of bytes that IQS reads at
at a time from the print queue. The default (and minimum) buffer size is
512 bytes. To increase the buffer size to 1KB use, IQS /K1024.
-Fixes/corrections
Problem with not being able to disable notification messages locally.
Problems with login script appearing in middle of print job.
What's new in I-Queue! Server v3.25:
====================================
-Additional Utilities
IQSN.COM v1.00
An optional TSR that can be loaded after IQS or IQSE to notify
print server operators of printer error conditions (printer out
of paper, or a general printer error).
SHOWPS.EXE v1.02
A command-line utility to report on the status of printers
attached to IQS/IQSE print servers on the current network.
-Additional Features
/E1 Error notification.
This switch causes IQS to send notification to the submitter of a
print job if the printer encounters an error condition. (Off-Line or
Out-of-Paper). <Default>
/E0 Error notification off.
Disables notification to the submitter.
/F3 Plotter Mode
This mode pauses IQS before each print job to allow an operator to
change paper before the job prints. After the paper is changed
type IQS /M, to allow IQS to print the next job.
-Fixes/corrections
Fixed typo in uninstall message.
Fixed problem where occassionally PreferredServer was reset incorrectly.
Fixed problem detaching from print queue using /Q2 option.
Added pause message to prevent help screen from scrolling.
Displays an error message when not connected to a Novell network.
Corrected random errors with /B option.
Fixed problem servicing 2 queues on different servers. (/Q2 option).
What's new in I-Queue! Server v3.22:
====================================
1.) Fix for still more PCs that would only print to LPTx ports when the /B
parameter was specified.
2.) Default polling delay when checking for new print jobs while IQS is idle
changed from 1 second to 3 seconds. The /Wx parameter can be used to
specify an alternate # of seconds to delay.
What's new in I-Queue! Server v3.21:
====================================
1.) Fix for some PCs that would only print to LPTx ports when the /B
parameter was specified. Most notably, some PS/2 models were affected.
2.) Default optimization (/O) value set to 128.